Featuring full aluminium construction this gas strut assisted slide gently and safely tilts your fridge to an angle that makes accessing the contents easy. When completely tilted, the mechanism locks into place. It cannot descend on its own, making it safe for all ages to use. With three locking mechanism positions the tilt angle can be set to suit your vehicle, be it a wagon, a ute or a tray back 4WD.
Raising the fridge is effortless also. The fridge weight is counter balanced by the gas struts. Simply flick the locking lever and begin lifting the slide. It will float upwards, then slide back. With interchangeable gas strut dynamics to match your load, life just gets easier.
The built in Cargo Shelf allows cargo to be stored on both sides and on top of the fridge while the vent holes punched in the side panels allow for plenty of ventilation for the fridge motor. No more hassles with gear falling behind your fridge when the slide it extended.
This Combo is compact, light and great value. One purchase does it all!
Best of all, they are made in Australia by the Oliver family so you know they’re good.
• All aluminium construction
• 250kg rated slide runners
• Gas strut assisted
• Tough ripple finish powder coating
NOTE:The Tilt Slide Combo will not suit all applications. Please check your available height and depth carefully when planning which TS Combo will fit. Attention to rear door and cargo barrier clearance (if fitted) is essential for wagons. Utes must check for Canopy opening clearance.
Tilt Slide Combo – 1
Designed to suit fridges up to 50 litres, such as the Waeco, Engel, ARB 35 & 47ltr and Bushman range. Easily installed on any flat surface. Slide ships with all mounting hardware. Maximum Drop: 165, 220, 273mm (select 1 of 3 positions to suit your application)
O/A size: L780 x W507 x H610mm
Tray size: L704 x W397mm x H520mm (internal)
Weight: 25kg (incl. Slide & Cargo Shelf)
Tilt Slide Combo – 1.5
Designed to suit CFX-50, CFX3-55 and similar fridges. Easily installed on any flat surface. Slide ships with all mounting hardware. Maximum Drop: 165, 220, 273mm (select 1 of 3 positions to suit your application)
O/A size: L780 x W580 x H610mm
Tray size: L704 x W470mm x H520mm (internal)
Weight: 27kg (incl. Slide & Cargo Shelf)
Tilt Slide Combo – 2
DescriptionDesigned to suit Engel 60, Waeco 80 and similar sized fridges. Easily installed on any flat surface. Slide ships with all mounting hardware. Maximum Drop: 165, 220, 273mm (select 1 of 3 positions to suit your application). •Utes – check height of canopy door opening
O/A size: L880 x W615 x H610mm
Tray size: L804 x W505mm x H520mm (internal)
Weight: 29kg (incl. Slide & Cargo Shelf)
Tilt Slide Combo – 2.25
Designed to suit the Waeco CF80, CFX 75, ARB 78, EvaKool RF60 and similar size fridges. Easily installed on any flat surface. Slide ships with all mounting hardware. The Tilt Slide Combo has a maximum drop of 273m which will suit most wagons and utes.
O/A size: L990 x W608 x H610mm
Tray size: L904 x W505mm x H520mm (internal)
Weight: 33.5kg (incl. Slide & Cargo Shelf)